Foil keyboards are usually manufactured according to the customer’s specifications.
For prototypes and standard applications however, there is a small range of standard keyboards which can be used without paying one off costs/development costs.
Standard solutions have turned out to be suitable in few cases, though, as they almost always are a compromise.
Therefore we recommend that you specify your desired version and demand us.

Standard keyboard series item no. FTWS-MA acc. to the following specifications:

more information ==>

• non-standard size
• made of polyester
• gilded snap domes 12mm
• keyboard matrix wiring
  „mF“:  2-color printing on the back side
  „mF“:  with integrated channels for insertable labels
  „oF“:  without decor foil (upper surface self-adhesive)
• rear side self-adhesive
• in silver conducting technique
• overprinted with graphite or carbon
• foil cable length 100mm
• outline cut
• with crimped socket RM2.54, female
  .../1: with crimped socket RM2.54 and strip, male
  .../2: with crimp terminal pins RM2.54 

Foil keyboard item no. FTOSD-Woehr acc. to the following specifications:

more information ==>

• made of polyester
• 98x25mm
• 2-colour printing on the back side
• 5 pieces gilded snap domes
• common conductor
• in silver conducting technique
• not embossed
• rear side self-adhesive
• foil cable length 55mm
• with crimped socket RM2,54 6-pin, tinned “male” contacts
• also available unlabelled or for customer labelling
  (item no. FTOSD-Wöhr/neut)
• also available with integrated LED-display (item no. FTOSD-Wöhr/LED)

Foil single pushbutton item no. FTWS01

more pictures ==>

Specifications:

• 2-colour printing on the back side
• 20,0x20,0mm
• 1 piece gilded snap dome 12mm
• in silver conducting technique
• overprinted with graphite
• high embossed diameter 13
• with integrated safety chamber
• rear side self-adhesive
• foil cable length 100mm
• optional crimped socket and contacts
• outline cut

Special features: can easily be modified according to the customer’s requirements at any time (dimensions, colour,...)

Foil single pushbutton
"with illumination" 
item no. FTWS01/bel.

• 1-colour printing on the back side, 25,0x25,0mm
• 1 piece gilded snap dome 12mm
• with integrated illumination in blue, red, yellow or green (ring can be illuminated)
• more information ==>

Standard keyboard FTWS-20/ES

• 141,9x128,5mm
• 2-colour printing on the back side
• 20 pieces gilded snap domes
• in silver conducting technique / with graphite
• more information ==>  

Standard keyboard FTWS-24/oF

• 141x86mm
• only circuit substructure without decor foil, upper side self-adhesive - 24 pieces gilded snap domes 12mm
  (in 5x5 matrix wiring)
• more information ==>  

Printed board for standard foil keyboard

• printed board FR 4 385 x 25mm
• through hole plated, drilled
• assembled with 10 x short stroke keys
• 1 x strip 7-pin wired-in

more pictures ==>

Printed circuit board for standard foil keyboard

• printed board from FR 4  114 x 95mm
• drilled (6 holes for threaded bolts M3)
• double-sided solder resist, through hole plated
• populated:
  1 strip tray RM2,54  2x10-pin
  20 short stroke keys and
  20 diodes 1N4148
• more pictures ==>

FSA "Flexible status displays” with or without additional keys

more information at
www.foiltronic.de

Standard keyboards for the
enclosures of the series GH02

Standard industrial keyboards (Built-in, built-on, desktop and drawer keyboards also as stainless steel version) can be found at: www.industrialkeyboard.com